POOL
L1 is the length of the pool without niche.
- Ecotop : L1 max 15000 mm
- Top’Moov : L1 max 150000 mm
L2 is the length of the pool, niche included. In a topmount system this dimension is not needed.
L3 is the slat reserve. Fill this in if you wish additional slats for replacement in case a few slats break. This cannot be selected together with R3 or R4.
B1 is the width of the niche or the topmount system.
- Ecotop : B1 maximal 6000 mm
- Top’Moov : B1 is the distance between the center of the rails. B1 must be 300 mm greater than B2. B1 max 5850 mm
B2 – B3 – B4 must be the same size. Measure this in the pool! If this is not the case, fill in the narrowest width.
- Top’Moov : B2=B3=B4 is max 5550 mmm.
R1 – R2 is the radius of the pool on the non-motor side. This number is rounded down. For example: a radius of 150mm will make the first 2 slats shorter.
Triangle if you choose this option you will get a triangle on the left and/or right side of the first slat. This is recommended when you have skimmers on the side walls of the pool!
R3 – R4 is the radius of the pool on the motor side.
STAIRS
T1 is the length of the stairs. When the length of the stairs is longer than the radius T5 in a roman end, the extra space is filled up with slats of the same length. This will not create an oval shape.
T2 space on the left side of the stairs.
T3 width of the stairs.
T4 space on the right side of the stairs.
T5 radius of the roman end. We always assume that a roman end is based on a circle! If the stairs have another shape, contact T&A for possibilities.
R5 – R6 this is the same idea as R1 – R2.
Triangle if you choose this option you will get a triangle on the left and/or right side of the first slat of your rectangular pool end.
R7 – R8 this is the radius on the corner between pool and stairs. This radius cannot interfere with R1 – R2 or R5 – R6. They must be separate roundings. If this is not the case, contact T&A for possibilities.